4/17/2018 11:05:57 AM
Abstract: This paper analyzes current standards for electromagnetic shielding garment at home and abroad from several aspects, including test principle, test system, evaluation index and result evaluation, and points out the existing problems and provides some suggestions on improvement. Key words: e…
12/20/2017 11:23:10 AM
Abstract: In order to prepare a composite microfilm composite fabric with excellent heat preservation and thermoregulation performance, the effect of different adhesives on the preparation of composite fabric was discussed. Firstly, situ polymerization was used to prepare phase change microcapsules. …
12/20/2017 12:00:00 AM
Abstract: In this paper, CA composite ultrafine fibers containing different TiO2 nanoparticle (NP) contents were synthesized via electrospinning for effective dyeing water treatment. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) images revealed that TiO2 NPs were evenl…
11/15/2017 1:53:19 PM
Abstract: Based on the test results of 70 batches of samples according to the standards GB/T 21655.1 — 2008 and GB/T 21655.2 — 2009, the paper worked out relevant comparison and analysis on absorbency and gave corresponding conclusion as well. Key words: moisture absorbent and quick drying; moistur…
11/15/2017 1:52:29 PM
Abstract: In order to study the suitable materials for 3D printed clothing, the cross section morphology,molecular structure, thermal properties, tensile properties and resilience of flexible PLA materials before and after melt spinning in 3D printers were tested and analyzed. The results show that t…
10/27/2017 3:26:18 PM
Abstract: In this article, the moisture transfer process and principle moisture absorption and quick-drying textiles in practical use were analyzed in detail. The scientificity and rationality of adopting water absorption rate, water-vapour transmission rate and accumulative one-way transport capacit…
9/11/2017 5:04:31 PM
Abstract: A kind of PET-Graphene (RGO) conductive material is prepared by treating PET nonwoven with plasma at atmosphere temperature and pressure to introduce amino groups to the surface of the PET nonwoven and then graft graphene to PET. The effects of plasma treatment time on the amino-group conce…
8/11/2017 7:22:26 PM
Abstract: This paper compares two standard systems for coated fabrics for membrane structures, namely the industry standard FZ/T 64014 — 2009 and the consortium standard T/ZZB 0135 — 2016. It turns out that the newly-established “Made in Zhejiang” consortium standard is more superior as it has mo…
7/24/2017 1:44:31 PM
Abstract: At present, polyethylene glycol (PEG) is often added into Bletilla striata polysaccharide (BSP) aqueous solution to decrease the modulus of Bletilla striata polysaccharide fiber. BSP/PEG fiber was prepared by phase-inversion method at room temperature. Electronic scanning microscopy (SEM) a…
5/9/2017 2:17:38 PM
Abstract: The non-isothermal crystallization process and kinetics of bio-based PA56 were investigated by differential scanning calorimeter (DSC) under different cooling rates. It is found that as the cooling rate accelerates, the crystallization peak will shift from single peak into double peaks.Jeri…
