1/10/2014 7:30:28 PM
Abstract: This paper summarized the testing methods of arsenic content in textiles, including atomic fluorescence spectrometry(AFS), atomic emission spectrometry (AES), inductively coupled plasma mass spectrometry(ICP-MS), atomic absorption spectrophotometry(AAS) and X-ray fluorescence spectrometry (…
12/18/2013 9:00:08 PM
Abstract: This article selected a representative public laundry as the object for investigating the sewage quality of laundry discharge. Based on the analysis results, the turbidity, chromaticity, conductivity and TOC are selected as the water-quality evaluation indexes of laundry wastewater. Key wor…
11/14/2013 11:11:51 AM
Abstract: Moisture content is a significant parameter throughout almost every process of textile industry.In this article, an online monitoring system was proposed based on temperature and humidity sensors for detecting fabric moisture according to ambient requirements. The results show that the syst…
11/14/2013 11:10:43 AM
Abstract: Mercury is a harmful heavy metal pollutant. Elemental mercury in textiles enters body tissue mainly through sweat, endangering human health. This article briefly described some of the common pretreatment methods and instrument analytical methods, and explained the methods for testing mercur…
10/16/2013 10:09:43 PM
Abstract: To overcome the deficiencies of existing quantitative analysis method of yarn, a new quantitative analysis method of yarn is developed depending on difference of fiber density. Practice has proved that this test method is simple, rapid, accurate, reliable and versatile. Since no harmful che…
10/15/2013 6:01:55 PM
Abstract: In this paper, the author proposed an algorithm for identifying fibers of blended yarns. For testing fiber migration index of yarns, it is a reliable test mode. Key words: image processing; mesh parameter; neural network; fiber migration index
9/24/2013 7:57:21 PM
Abstract: The laws, regulations and administrative provisions on concentration limits of toxic and harmful substances in textiles launched by developed countries since the 21st century are discussed and analyzed in this paper, as well as its test methods and standards. It points out that more and mor…
9/24/2013 7:56:14 PM
Abstract: This paper describes a method of functional finishing of cotton fabrics via microwave assisted in-situ generation of ZnO nanoparticles in them. The modified hyperbranched polymer (PNP) and zinc nitrate were used as the reagents. The reaction conditions were optimized. The treated cotton fab…
8/15/2013 6:15:59 PM
Abstract: In this paper, the main reasons for fiber shedding occurred in wool carpet were studied. Through testing the fiber shedding quantity and analyzing the influence of fiber and spinning process, some solutions were put forward for reducing short fiber content and improving quality of wool carp…
8/15/2013 6:07:14 PM
Abstract: At present, the safety problem of textile chemicals is one of the main obstacles to influence the innovation-driven and the transformation of development mode in the textile chemicals industry and the dyeing and finishing industry. Therefore, many countries take a series of measures to cont…
