Jacquard Weaving

SX Jacquard machine provides excellent productivity

Introduced initially in 2010, and later refined in 2015, the new SX Jacquard machine has gained wide and enthusiastic approval by customers. This extremely versatile machine for broad use in modern Jacquard weaving mills meets the highest demands. The compact machine offers higher performance – meaning high loads and high speed – supported by optimized kinematics and a nearly vibration-free drive mechanism. It offers extreme reliability and requires a minimum of maintenance.

The SX is available in two sizes, with 1408 or 2688 hooks, and is adaptable to rapier, air jet, and projectile weft-insertion systems. The larger format is on exhibit performing on an installation in combination with a perfectly fitted Staubli harness with 16,176 harness cords. An astoundingly fine upholstery fabric is being woven over a reed width of 190cm.

SX electronic Jacquard machine

LX Jacquard machine for perfecting the art of patterning

The new LX Jacquard machine is being displayed on a demonstration stand. LX and LXL Jacquard machines (particularly suitable for large-format applications) are extremely versatile, for broad use in modern Jacquard weaving. The completely re-engineered LX series features a new lifting mechanism that allows high-speed weaving even of extremely heavy fabrics. With the new coaxial drive shaft and re-sized chassis supporting beams and bearings, the new models can handle up to 26% greater loads than the previous models. In addition, the positioning of the fans in the housing of the LX optimizes internal airflow, thereby ensuring that the machine interior remains clean and at a controlled temperature. The LX models are available in sizes up to 6,144 hooks, and with the LXL formats up to 36,864 hooks can be achieved by combining two machines.

In addition to the aforementioned Jacquard machine models, St?ubli’s LX, LXL, and SX series include special models for the production of all types of velvet fabrics: the LX V, LXL V, and SX V. Offering the possibility of flexible combination of the 3-position modules with the height-adjustable 2-position modules, the pile and ground warp can be activated with the same machine.

LX electronic Jacquard machine

CX 172 Jacquard machine for patterning name selvedge

The CX 172 is a highly modern Jacquard machine with computerized control for patterning name selvedges. The machine heads are available with either 64 or 80 hooks and are adaptable to any type of weaving machine. The CX 172 is equipped with independent servo-drive transmission, a feature that not only dramatically simplifies its installation but allows easy adjustment of the heads to match the exact weaving width. The electronic controller type DC1 for the CX 172 heads ensures comfortable pattern programming.

The CX 172 Jacquard machine can be seen on a demonstration stand at India ITME.

Frame Weaving

S3000/S3200 – New generation of dobbies

Based on the success of the rotary dobby invented by Staubli many decades ago, the newly developed S3000/S3200 rotary dobby family comes with a new locking system, which is the heart of every dobby. The evolutionary principle features enhanced security for the selection of heald frames, allowing higher running speeds as well as superior reliability. Thanks to its state-of-the-art technology, the new machine is even more compact and it operates with less noise and vibration despite its higher speed. It also has a built-in cooling system connection and requires less maintenance.

The S3260 rotary dobby is being displayed in operation on a demonstration unit at the St?ubli booth. This dobby is ideal for weaving patterned fabrics and is adaptable to air-jet weaving machines.

S3260 electronic rotary dobby

1692 cam motion

Long years of experience and intensive research in the field of shedding technology are the basis of Staubli’s high-performance cam motions. Having been continually further developed, they feature extremely robust construction with a mono-block housing and are made of the highest-quality materials to ensure a very long service life and exceptional reliability.

The brand new 1692 cam motion can be seen at the booth on a demonstration stand.

Further examples of Staubli’s Jacquard machines, dobbies, and cam motions can be seen at the booths of Staubli partners.

Automation in weaving preparation

When it comes to efficient warp and style changes in the weaving mill, one thinks of Staubli and its large range of systems and machines. Standing for the highest quality and innovative features, Staubli offers advanced system solutions and machinery for automatic drawing in and warp tying.

SAFIR S40 – the perfect solution for denim weavers

Drawing in cotton, and denim warps in particular, is the speciality of the SAFIR S40 automatic drawing-in machine: It draws in directly from one warp beam into the drop wires, healds, and reed in a single cycle. Featuring cutting-edge technologies such as an optical sensor to detect the correct repeat of yarn type and colour, it enables continued workflows and ensures reliability in terms of quality and quantity, resulting in economical production of fabrics like denim, bed and table linen, or blouse and shirt fabrics produced with a maximum of 12 heald frames.    

SAFIR S40 mobile automatic drawing-in machine

Warp tying

The proven TOPMATIC warp-tying machine is being displayed at the booth. This machine stands for the very highest-quality warp tying over the full yarn range, even down to the finest threads. Featuring unique electronic double-end detection, this machine prevents the tying of double ends even when tying flat sheets.

The TOPMATIC warp tying machine is being demonstrated at the booth in combination with the TPF3B-10 warp tying frame, knotting a dyed shirting application with a 1:1 lease in the warp sheet.

TOPMATIC warp-tying machine

Schonherr carpet systems

With its Schonherr brand, Staubli is showing top-quality area rug samples with new design options and ultra-high reed densities produced on its latest carpet weaving machines:

·ALPHA 500 UNIVERSAL

·ALPHA 500 XDHC

·ALPHA 500 INNOVATION

These machines allow weaving widths up to 5.3 m and the possibility to create densities with up to 3,000,000 points/m2. The ALPHA 500 serie provides all proven features of the ALPHA 400 series, increases the productivity, and ensures the utmost flexibility with different carpet sizes.

With ALPHA weaving machines, weaving mills can quickly respond to any market requirement and can produce a large product range, including area rugs and wall-to-wall carpeting for the residential, contract, and transportation sectors in excellent qualities and impressive patterns and at outstanding production rates.

ALPHA 500 UNIVERSAL carpet-weaving machine

Design effects that boost the creativity of carpet designers

To excel in the demanding modern high-end carpet market, mills and designers must collaborate hand in hand and highlight their knowhow with outstanding designs. ALPHA carpet weaving machines, in combination with exclusive design options (patents pending), support carpet weavers in creating extraordinary carpets:

·Magic Weft Effect 3 – up to three colours visible in the same pick line

·Magic Shadow Effect – Surprising patterns in a one-colour carpet; different surfaces are seen depending on the viewing angle

·Traditional Carpet Effect – providing carpet backs that seem to be hand knotted

DEIMO knitting solutions

With its DEIMO knitting solutions, St?ubli is a leading manufacturer of drive and control systems for a wide range of applications. These technically refined products are being used very successfully for customized solutions in the knitting industry. Thanks to their high performance and flexibility, these products serve to automate increasingly complex production processes in modern circular knitting machines.

The latest model in the DEIMO range of controllers, the 2900 SL, is being shown at the booth. It serves as an electronic controller for circular knitting machines used to produce hosiery goods, socks, woollen stockings, pantyhose, and medium-to-large diameter knitting goods for various sectors. The 2900 SL features CAD graphic software for pattern programming, interfaces, remote control, and machine monitoring. It is driven by a Linux-based operating system.

2900 SL electronic control system for circular sock and seamless knitting machines